SuperPAD Hardware

In Computer und Netzwerk SuperPAD / FlyTouch II / Apad GF10 Tablet | Erstellt: 23.11.2010, 18:49 | Editiert: 25.10.2018, 15:46 | 51.668 mal angesehen | Seite drucken

Zurück zu "SuperPAD Android-Tablet"

SuperPAD Hardware

Die Hardware & Software, soweit sich die Quellen einig sind:

  • Name: WWE10 (Hersteller: InfoTMIC)
  • Bildschirm: 10,2″, 1024×600 Pixel, Hart-Kunststoff ohne Wellen
  • Texas Instruments ADS7846 Touchscreen, resistive, "single touch" (nicht kapazitiv, kein Multitouch)
  • CPU: 800MHz ARM11, "InfoTM IMAPx220" (ARM1136-Kern)
  • Vivante GC600 GPU
  • RAM: 256MB DDR2
  • Speicher: 2GB intern plus 2x MicroSDHC (maximal je 16GB)
  • Kamera: 1.3 Megapixel, nach vorne gerichtet (Fotos haben 1600×1200 Pixel, 1,92MP, evtl. interpoliert)
  • LAN: 1x RJ45, 10/100Mbit, der MAC-Adresse nach von Taiwan Semiconductor
  • WLAN: 802.11b/g, der MAC-Adresse nach AzureWave-Hardware
  • Vibrator
  • Unterstützung für externe 3G-Modems (USB)
  • G-Sensor: In alle 4 Richtungen mit Bildschirmdrehung
  • GPS: HopeRF "GPS01" (XN203, Datenblatt), 3s Warmstart, 36s Kaltstart, 65 Kanäle
  • Audio: 2x Lautsprecher, Mikrofon
  • Anschlüsse: 1x Kopfhöhrer (3,5mm Klinke), 2x USB 2.0 Host, 2x TF/MicroSDHC-Karte, 1x HDMI-Ausgang, 1x RJ45, 1x Stromversorgung, 1x Fach für Touch-Stift, 1x externe GPS-Antenne
  • Knöpfe (Längsseite): An/Aus, Lautstärke +/-, Menü, Home, WLAN An/Aus, Reset
  • Batterie: Li-Poly, 3800mAh @ 7.4V
  • Netzteil: 9V/2.5A
  • Gewicht: ~700g
  • Zubehör im Lieferumfang: Netzteil, Kopfhöhrer, Stift, Handbuch
  • Betriebssystem: Android 2.1
  • Media-Fähigkeiten: MP3, WMA, FLAC, APP, OGG, H264, AVI, rmvb, MP4, MKV, FLV, DIVX bis 1080p

Übersetzter Infotext der IMAPx220-Produktseite von InfoTM:

IMAPx220 ein ARM11 Kern-basierte High-Performance-Multimedia-Anwendungen Prozessor. Seine interne integrierte GPS-Basisband-Prozessor, 2D/3D Grafik-, Video-Bearbeitung, Audio-Verarbeitung und Display-Signalverarbeitung und Skalierung der starken Performance der anderen Hardware-Beschleuniger. 1080p HD-Video-Beschleuniger unterstützt JPEG, MPEG4, H.263, H.264, VC1, RV8/9/10, DIVX4/5/6, XVID, und On2 VP6-Decoder und unterstützt bis zu SXGA Auflösung JPG, MPEG4, H 0,263, H.264-Codierung. Darüber hinaus IMAPx22 integriert auch 2D/3D Grafik-Hardware-Beschleuniger, um mit den Auswirkungen der Mensch-Maschine-Schnittstelle und 3D-Gaming-Anwendungen zu erfüllen. IMAPx220 integrierte GPS-Basisband-Prozessor, genießen Nutzer des Internet und Entertainment-Services, während der Zugang zur Navigation. IMAPx220 Verwendung TSMC 65nm Low-Power CMOS-Technologie, die CPU-Frequenz bis zu 1GHz. IMAPx220 kann zu High-End Handheld-Multimedia-Geräte, Navigationsgeräte, mobile Internet-Geräte, Netbooks, E-Bücher und andere Unterhaltungselektronik eingesetzt werden.

Flash/NAND-Layout

<6>[    2.165000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xd5 (Hynix NAND 2GiB 3,3V 8-bit)
<6>[    2.170000] Scanning device for bad blocks
<5>[    2.380000] Creating 9 MTD partitions on "NAND 2GiB 3,3V 8-bit":
<5>[    2.385000] 0x000001a00000-0x000002000000 : "kernel"
<5>[    2.390000] 0x000001800000-0x000001a00000 : "ramdisk"
<5>[    2.400000] 0x000000500000-0x000000700000 : "recovery"
<5>[    2.405000] 0x000012800000-0x00001e800000 : "system"
<5>[    2.415000] 0x00001e800000-0x00005c000000 : "userdata"
<5>[    2.420000] 0x00005c000000-0x000060000000 : "cache"
<5>[    2.430000] 0x000060000000-0x00007ff00000 : "local"
<5>[    2.435000] 0x00007ff00000-0x000080000000 : "panic"
<5>[    2.445000] 0x000002800000-0x00000a800000 : "resv"

Links

System Info

dmesg

<5>[    0.000000] Linux version 2.6.32.9 (hzhao@emma) (gcc version 4.4.0 (GCC) ) #1 Wed Nov 3 17:55:14 CST 2010
<4>[    0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[    0.000000] Machine: WOODY
<4>[    0.000000] Ignoring unrecognised tag 0x00000000
<4>[    0.000000] Ignoring unrecognised tag 0x54410008
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 65536
<7>[    0.000000] free_area_init_node: node 0, pgdat c052c54c, node_mem_map c05f4000
<7>[    0.000000]   Normal zone: 512 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
<4>[    0.000000] CPU IMAPX200 (id 0x13ab2000)
<6>[    0.000000] IMAP Clocks, (c) 2009 Infotm Micro Electronics
<6>[    0.000000] iMAPx200: 67108864 bytes SDRAM reserved for memalloc at 0x4107f000
<4>[    0.000000] IMAP Power Management, Copyright 2010 Infotm
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
<5>[    0.000000] Kernel command line: console=ttySAC3,115200 androidboot.mode=normal bmagic=0xdb6db610
<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.000000] Memory: 256MB = 256MB total
<5>[    0.000000] Memory: 187520KB available (4480K code, 989K data, 456K init, 0K highmem)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:128
<4>[    0.000000] Console: colour dummy device 80x30
<7>[    0.000000] FOUND calc 114583, divisor 36
<6>[    0.000000] console [ttySAC3] enabled
<6>[    0.010000] Calibrating delay loop... 791.34 BogoMIPS (lpj=1978368)
<4>[    0.120000] Mount-cache hash table entries: 512
<6>[    0.125000] CPU: Testing write buffer coherency: ok
<6>[    0.135000] NET: Registered protocol family 16
<4>[    0.155000] imapx200: Initialising architecture
<6>[    0.160000] leaving imap_arch_init
<6>[    0.165000] imapx200_dma_init: Registering DMA channels: ok!
<4>[    0.205000] bio: create slab <bio-0> at 0
<5>[    0.215000] SCSI subsystem initialized
<6>[    0.220000] usbcore: registered new interface driver usbfs
<6>[    0.225000] usbcore: registered new interface driver hub
<6>[    0.230000] usbcore: registered new device driver usb
<6>[    0.235000] <6>imapx200_iic0 imapx200_iic0: i2c-1: IMAPX200 I2C adapter
<6>[    0.245000] <6>imapx200_iic1 imapx200_iic1: i2c-2: IMAPX200 I2C adapter
<6>[    0.255000] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.265000] NET: Registered protocol family 2
<6>[    0.270000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.275000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.280000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.285000] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.290000] TCP reno registered
<6>[    0.295000] NET: Registered protocol family 1
<6>[    0.300000] RPC: Registered udp transport module.
<6>[    0.305000] RPC: Registered tcp transport module.
<6>[    0.310000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[    0.315000] Trying to unpack rootfs image as initramfs...
<6>[    0.415000] Freeing initrd memory: 504K
<3>[    0.420000] iMAP PWM Driver Init.
<6>[    0.430000] ashmem: initialized
<6>[    0.460000] ROMFS MTD (C) 2007 Red Hat, Inc.
<4>[    0.465000] yaffs Nov  3 2010 17:54:48 Installing. 
<6>[    0.470000] alg: No test for stdrng (krng)
<6>[    0.475000] io scheduler noop registered
<6>[    0.480000] io scheduler anticipatory registered
<6>[    0.485000] io scheduler deadline registered
<6>[    0.490000] io scheduler cfq registered (default)
<7>[    0.495000] imapbl_write_intensity: intensity 255
<6>[    0.495000] Imap Framebuffer Driver Initialization Start!
<6>[    0.500000] Set Lcd Backlight Brightness 0
<6>[    0.505000] LCD TYPE :: will be initialized
<4>[    0.515000] Console: switching to colour frame buffer device 128x37
<6>[    0.535000] fb0: imapfb frame buffer device
<6>[    0.550000] fb1: imapfb frame buffer device
<6>[    0.550000] Set Lcd Backlight Brightness 75
<1>[    0.555000] imap-fb, 0x1, 0x1, 0x3e
<6>[    0.560000] Imap Framebuffer Driver Initialization OK!
<6>[    0.565000] HDMI Probe to add i2c driver for HDMI device
<6>[    0.570000] Device for HDMI will be Initializad
<4>[    0.575000] TPI Firmware Version 0.28
<4>[    0.990000] 0x9022
<4>[    1.460000] 0x9022
<6>[    1.530000] <3>imapx200_iic1 imapx200_iic1: [IMAPX200_IIC: ERR] iic thread TX_ABORT occur
<6>[    1.530000] <3>imapx200_iic1 imapx200_iic1: [IMAPX200_IIC: ERR] TX_ABORT source is 8
<6>[    1.530000] <3>imapx200_iic1 imapx200_iic1: [IMAPX200_IIC: ERR] slave address is 39
<6>[    1.540000] Init HDMI device OK
<6>[    1.540000] HDMI device add i2c driver OK!
<6>[    2.095000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    2.105000] imapx200-uart.0: imapx200_serial0 at MMIO 0x20e20000 (irq = 51) is a IMAPX200
<6>[    2.110000] imapx200-uart.1: imapx200_serial1 at MMIO 0x20e21000 (irq = 23) is a IMAPX200
<6>[    2.115000] imapx200-uart.2: imapx200_serial2 at MMIO 0x20e22000 (irq = 13) is a IMAPX200
<6>[    2.120000] imapx200-uart.3: imapx200_serial3 at MMIO 0x20e23000 (irq = 33) is a IMAPX200
<6>[    2.140000] brd: module loaded
<6>[    2.150000] loop: module loaded
<6>[    2.155000] iMAPx200 NAND MTD Driver (c) 2009,2014 InfoTM
<6>[    2.160000] Method: IRQ(1), DMA(1), SECC(0), DEC.RDY, CRCD++
<6>[    2.165000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xd5 (Hynix NAND 2GiB 3,3V 8-bit)
<6>[    2.170000] Scanning device for bad blocks
<5>[    2.380000] Creating 9 MTD partitions on "NAND 2GiB 3,3V 8-bit":
<5>[    2.385000] 0x000001a00000-0x000002000000 : "kernel"
<5>[    2.390000] 0x000001800000-0x000001a00000 : "ramdisk"
<5>[    2.400000] 0x000000500000-0x000000700000 : "recovery"
<5>[    2.405000] 0x000012800000-0x00001e800000 : "system"
<5>[    2.415000] 0x00001e800000-0x00005c000000 : "userdata"
<5>[    2.420000] 0x00005c000000-0x000060000000 : "cache"
<5>[    2.430000] 0x000060000000-0x00007ff00000 : "local"
<5>[    2.435000] 0x00007ff00000-0x000080000000 : "panic"
<5>[    2.445000] 0x000002800000-0x00000a800000 : "resv"
<4>[    2.450000] [drivers/spi/spi_imapx200.c]:imapx200_spi_init!
<4>[    2.455000] [drivers/spi/spi_imapx200.c]:imapx200_spi_probe!
<6>[    2.460000] imapx200_ssim0 imapx200_ssim0.0: bitbang at c8b876c0
<4>[    2.465000] [drivers/spi/spi_imapx200.c]:imapx200_spi_initialsetup!
<6>[    2.470000] gmac-univ Ethernet Driver, V1.0
<0>[    2.475000] eth0: gmac-univ at d0838000 IRQ 32 MAC: 00:1b:21:cb:b4:f4 
<6>[    2.480000] PPP generic driver version 2.4.2
<6>[    2.485000] PPP Deflate Compression module registered
<6>[    2.490000] PPP BSD Compression module registered
<6>[    2.495000] PPP MPPE Compression module registered
<6>[    2.500000] NET: Registered protocol family 24
<5>[    2.505000] usbmon: debugfs is not available
<6>[    2.510000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    2.520000] imapx200_usbhost20 imapx200_usbhost20: Infotm Ehci Controller
<6>[    2.525000] imapx200_usbhost20 imapx200_usbhost20: new USB bus registered, assigned bus number 1
<6>[    2.555000] imapx200_usbhost20 imapx200_usbhost20: irq 44, io mem 0x20c81000
<6>[    2.570000] imapx200_usbhost20 imapx200_usbhost20: USB 2.0 started, EHCI 1.00
<6>[    2.575000] usb usb1: configuration #1 chosen from 1 choice
<6>[    2.580000] hub 1-0:1.0: USB hub found
<6>[    2.585000] hub 1-0:1.0: 4 ports detected
<6>[    2.590000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    2.600000] imapx200_usbhost11 imapx200_usbhost11: Infotm Ohci Controller
<6>[    2.605000] imapx200_usbhost11 imapx200_usbhost11: new USB bus registered, assigned bus number 2
<6>[    2.610000] imapx200_usbhost11 imapx200_usbhost11: irq 26, io mem 0x20c80000
<6>[    2.675000] usb usb2: configuration #1 chosen from 1 choice
<6>[    2.680000] hub 2-0:1.0: USB hub found
<6>[    2.680000] hub 2-0:1.0: 4 ports detected
<6>[    2.690000] usbcore: registered new interface driver cdc_wdm
<6>[    2.695000] Initializing USB Mass Storage driver...
<6>[    2.700000] usbcore: registered new interface driver usb-storage
<6>[    2.705000] USB Mass Storage support registered.
<6>[    2.710000] usbcore: registered new interface driver usbserial
<6>[    2.715000] usbserial: USB Serial Driver core
<3>[    2.720000] create option mode sys succeed
<6>[    2.725000] USB Serial support registered for GSM modem (1-port)
<6>[    2.730000] usbcore: registered new interface driver option
<6>[    2.735000] option: v0.7.2:USB Driver for GSM modems
<6>[    2.745000] mice: PS/2 mouse device common for all mice
<6>[    2.750000] ---Headphone is not alive!
<6>[    2.755000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>[    2.760000] ads7846 spi0.0: touchscreen, irq 1
<6>[    2.765000] input: ADS7846 Touchscreen as /devices/platform/imapx200_ssim0.0/spi0.0/input/input1
<6>[    2.775000] iMAPx200 RTC, (c) 2009, 2014 InfoTM Microelctronics Co., Ltd
<6>[    2.785000] using rtc device, imap, for alarms
<6>[    2.790000] imapx200_rtc imapx200_rtc: rtc core: registered imap as rtc0
<6>[    2.795000] i2c /dev entries driver
<6>[    2.800000] Linux video capture interface: v2.00
<6>[    2.805000] usbcore: registered new interface driver uvcvideo
<6>[    2.810000] USB Video Class driver (v0.1.0)
<4>[    3.015000] [camif]-:flag_phy_addr = 4801d000
<6>[    3.025000] [SDHCI0]:infoTM sdhci host driver init.
<3>[    3.030000] [sdhci]-SDIO MAX CLOCK RATE = 86400000
<6>[    3.035000] Registered led device: mmc0::
<6>[    3.040000] mmc0: SDHCI controller on info_sdi0 [imapx200_sdi0.0] using ADMA
<6>[    3.045000] [SDHCI1]:infoTM sdhci host driver init.
<6>[    3.050000] channel 1 doesn't work right now
<3>[    3.055000] [sdhci]-SDIO MAX CLOCK RATE = 86400000
<6>[    3.060000] Registered led device: mmc1::
<6>[    3.065000] mmc1: SDHCI controller on info_sdi1 [imapx200_sdi1.1] using ADMA
<4>[    3.070000] wifi_switch module init
<4>[    3.070000] switch_gpio is 47
<6>[    3.100000] usbcore: registered new interface driver usbhid
<6>[    3.105000] usbhid: v2.6:USB HID core driver
<6>[    3.115000] logger: created 64K log 'log_main'
<6>[    3.120000] logger: created 256K log 'log_events'
<6>[    3.125000] logger: created 64K log 'log_radio'
<6>[    3.135000] logger: created 64K log 'log_system'
<6>[    3.145000] IX210 iDSP driver (c) 2009, 2014 InfoTM
<6>[    3.150000] IX210 iGPS driver (c) 2009, 2014 InfoTM
<6>[    3.155000] Advanced Linux Sound Architecture Driver Version 1.0.21.
<6>[    3.165000] mmc0: new high speed SDHC card at address e624
<7>[    3.170000] **********   iis_clock_rate is 19bfcc00
<6>[    3.170000] es8328: Audio Codec Driver v0.12
<6>[    3.175000] asoc: es8328 <-> imapx200-i2s mapping ok
<6>[    3.180000] mmcblk0: mmc0:e624 SU16G 14.8 GiB 
<6>[    3.185000]  mmcblk0: p1
<6>[    3.505000] ALSA device list:
<6>[    3.510000]   #0: imapx200 (es8328)
<6>[    3.515000] TCP cubic registered
<6>[    3.515000] NET: Registered protocol family 17
<6>[    3.520000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[    3.530000] imapx200_rtc imapx200_rtc: setting system clock to 2010-11-27 10:03:27 UTC (1290852207)
<6>[    3.560000] Bosch Sensortec Device detected!
<6>[    3.560000] BMA150/SMB380 registered I2C driver!
<6>[    3.565000] bma150 device create ok
<6>[    3.610000] Freeing init memory: 456K
<7>[    3.610000] FOUND calc 114583, divisor 36
<7>[    4.210000] FOUND calc 114583, divisor 36
<6>[    4.265000] yaffs: dev is 32505859 name is "mtdblock3"
<6>[    4.270000] yaffs: passed flags ""
<4>[    4.275000] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[    4.305000] yaffs: restored from checkpoint
<4>[    4.310000] yaffs_read_super: isCheckpointed 1
<6>[    4.330000] yaffs: dev is 32505860 name is "mtdblock4"
<6>[    4.335000] yaffs: passed flags ""
<4>[    4.335000] yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>[    4.370000] yaffs: restored from checkpoint
<4>[    4.380000] yaffs_read_super: isCheckpointed 0
<6>[    4.395000] yaffs: dev is 32505861 name is "mtdblock5"
<6>[    4.400000] yaffs: passed flags ""
<4>[    4.405000] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[    4.410000] yaffs: restored from checkpoint
<4>[    4.415000] yaffs_read_super: isCheckpointed 1
<6>[    4.430000] yaffs: dev is 32505862 name is "mtdblock6"
<6>[    4.435000] yaffs: passed flags ""
<4>[    4.435000] yaffs: Attempting MTD mount on 31.6, "mtdblock6"
<4>[    4.445000] yaffs: restored from checkpoint
<4>[    4.450000] yaffs_read_super: isCheckpointed 1
<7>[    4.535000] FOUND calc 114583, divisor 36
<3>[    4.580000] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>[    4.600000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[    4.700000] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[    4.790000] eth0: link down
<7>[    4.810000] [OPS DEBUG] Get into asysops device driver
<7>[    4.810000] [OPS DEBUG] Open asysops device node OK
<7>[    4.810000] [OPS DEBUG] Get asysops ioctl
<7>[    4.810000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[    4.810000] [OPS DEBUG] Normal exit asysops ioctl, 0
<7>[    4.810000] [OPS DEBUG] Get into asysops device driver
<7>[    4.810000] [OPS DEBUG] Open asysops device node OK
<7>[    4.810000] [OPS DEBUG] Get asysops ioctl
<7>[    4.810000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[    4.810000] [OPS DEBUG] Normal exit asysops ioctl, 0
<7>[    4.810000] [OPS DEBUG] Get into asysops device driver
<7>[    4.810000] [OPS DEBUG] Open asysops device node OK
<7>[    4.810000] [OPS DEBUG] Get asysops ioctl
<7>[    4.810000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[    4.810000] [OPS DEBUG] Normal exit asysops ioctl, 0
<7>[    4.810000] [OPS DEBUG] Get into asysops device driver
<7>[    4.810000] [OPS DEBUG] Open asysops device node OK
<7>[    4.810000] [OPS DEBUG] Get asysops ioctl
<7>[    4.810000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[    4.810000] [OPS DEBUG] Normal exit asysops ioctl, 0
<7>[    4.810000] [OPS DEBUG] Get into asysops device driver
<7>[    4.810000] [OPS DEBUG] Open asysops device node OK
<7>[    4.810000] [OPS DEBUG] Get asysops ioctl
<7>[    4.810000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[    4.810000] [OPS DEBUG] Normal exit asysops ioctl, 0
<6>[    5.210000] galcore galcore: GPU(v2.5.3) power is ready.
<7>[    6.020000] charging status changed, charging_status is 1, charging_old_status is 0
<7>[    6.895000] i2s clkdiv = 305, cdclkdiv = 24
<7>[    6.905000] ----src_addr0 is 48a60000, src_addr1 is 48a61000
<6>[   33.080000] request_suspend_state: wakeup (3->0) at 33084024002 (2010-11-27 10:03:57.049088000 UTC)
<7>[   33.095000] imapbl_write_intensity: intensity 204
<6>[   33.095000] BRIGHT SET OK
<7>[   34.020000] battery is changing, battery is 59, old_battery is 59
<4>[   34.610000] rtusb init --->
<6>[   34.615000] usbcore: registered new interface driver rt2870
<6>[   34.840000] usb 1-1: new high speed USB device using imapx200_usbhost20 and address 2
<6>[   34.990000] usb 1-1: configuration #1 chosen from 1 choice
<4>[   34.995000] 
<4>[   34.995000] 
<4>[   34.995000] === pAd = d5b02000, size = 476392 ===
<4>[   34.995000] 
<4>[   35.000000] <-- RTMPAllocAdapterBlock, Status=0
<4>[   35.755000] <-- RTMPAllocTxRxRingMemory, Status=0
<4>[   35.765000] -->RTUSBVenderReset
<4>[   35.765000] <--RTUSBVenderReset
<4>[   36.065000] Key1Str is Invalid key length(0) or Type(0)
<4>[   36.070000] Key2Str is Invalid key length(0) or Type(0)
<4>[   36.075000] Key3Str is Invalid key length(0) or Type(0)
<4>[   36.080000] Key4Str is Invalid key length(0) or Type(0)
<4>[   36.085000] 1. Phy Mode = 0
<4>[   36.085000] 2. Phy Mode = 0
<4>[   36.090000] NVM is Efuse and its size =2d[2d0-2fc] 
<4>[   36.165000] 3. Phy Mode = 0
<4>[   36.275000] RTMPSetPhyMode: channel is out of range, use first channel=1 
<4>[   36.295000] <==== rt28xx_init, Status=0
<4>[   36.300000] 0x1300 = 00073200
<7>[   38.020000] battery is changing, battery is 60, old_battery is 60
<4>[   41.825000] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 191
<4>[   41.865000] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
<3>[   43.455000] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
<3>[   44.205000] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
<3>[   44.555000] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
<3>[   44.880000] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
<3>[   45.065000] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
<3>[   45.225000] init: sys_prop: permission denied uid:10010  name:sys.settings_google_version
<7>[   48.900000] i2s clkdiv = 305, cdclkdiv = 24
<7>[   48.995000] ----src_addr0 is 48a60000, src_addr1 is 48a61000
<7>[   48.995000] trigger command is 1
<7>[   49.685000] trigger command is 0
<7>[   51.440000] [OPS DEBUG] Get into asysops device driver
<7>[   51.440000] [OPS DEBUG] Open asysops device node OK
<7>[   51.440000] [OPS DEBUG] Get asysops ioctl
<7>[   51.440000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[   51.440000] [OPS DEBUG] Normal exit asysops ioctl, 0
<7>[   53.435000] [OPS DEBUG] Get into asysops device driver
<7>[   53.435000] [OPS DEBUG] Open asysops device node OK
<7>[   53.435000] [OPS DEBUG] Get asysops ioctl
<7>[   53.435000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[   53.435000] [OPS DEBUG] Normal exit asysops ioctl, 724249387
<7>[   53.440000] [OPS DEBUG] Get into asysops device driver
<7>[   53.440000] [OPS DEBUG] Open asysops device node OK
<7>[   53.440000] [OPS DEBUG] Get asysops ioctl
<7>[   53.440000] [OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[   53.440000] [OPS DEBUG] Normal exit asysops ioctl, 724249387
<7>[   60.200000] i2s clkdiv = 305, cdclkdiv = 24
<7>[   60.245000] ----src_addr0 is 48a60000, src_addr1 is 48a61000
<7>[   60.245000] trigger command is 1
<7>[   60.935000] trigger command is 0
<7>[  192.020000] battery is roll-back, battery is 73, old_battery is 60

/proc/cpuinfo

Processor	: ARMv6-compatible processor rev 5 (v6l)
BogoMIPS	: 791.34
Features	: swp half thumb fastmult vfp edsp java 
CPU implementer	: 0x41
CPU architecture: 6TEJ
CPU variant	: 0x1
CPU part	: 0xb36
CPU revision	: 5

Hardware	: WOODY
Revision	: 0004
Serial		: 0000000000000000

/proc/meminfo

MemTotal:         188700 kB
MemFree:            2828 kB
Buffers:              44 kB
Cached:            25128 kB
SwapCached:            0 kB
Active:            65624 kB
Inactive:          65056 kB
Active(anon):      55308 kB
Inactive(anon):    60400 kB
Active(file):      10316 kB
Inactive(file):     4656 kB
Unevictable:         284 kB
Mlocked:               0 kB
HighTotal:             0 kB
HighFree:              0 kB
LowTotal:         188700 kB
LowFree:            2828 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 4 kB
Writeback:             0 kB
AnonPages:        103400 kB
Mapped:            21208 kB
Shmem:              9916 kB
Slab:               5080 kB
SReclaimable:       1024 kB
SUnreclaim:         4056 kB
KernelStack:        1984 kB
PageTables:         6296 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:       94348 kB
Committed_AS:    3059576 kB
VmallocTotal:     514048 kB
VmallocUsed:      108420 kB
VmallocChunk:     353284 kB

Weitere Seiten in 'SuperPAD / FlyTouch II / Apad GF10 Tablet'

Kommentare (10)

hox sagt:

Hi, hat schon mal jemand probiert, den CPU Takt wieder leicht abzusenken? Wenn er standarmäßig bei 700-800 MHz liegt, aber auf 1000 hochgejubelt wurde, könnte ein Kompromiss längere Akkulaufzeit bringen, ohne das System zu bremsen?

Eumeltier sagt:

Ist bei Euch der Lautsprecher auch so leise?

Meikel sagt:

Ja ist bei meiem Pad leider auch!
Hat einer schon eine Lösung für sms und telefon umts geht.

dg5fdg sagt:

So jetzt ist mein PAD auch hinüber. Lässt sich nicht mehr einschalten. Akku ist selbstverständlich voll geladen. Das hoffe ich zumindestens, da es seit 2 Tagen am Strom hängt.
Habe mal an den Lieferanten (eFox) ’ne Mail geschickt. Ausser der Frage nach volgeladenem Akku kam noch nix. Bin mal gespannt wie die Sache ausgeht. Geld zurück oder Austausch.

Ich halte Euch auf dem Laufenden.

Bis dann frohes Fest.

dg5fdg
Olaf

Yoram sagt:

hi
where can i get the rom for my superpad flytouch 2 so
i will be able to recover to the original state,
(it bricked)

nanu sagt:

Hat schon jemand herausgefunden, ob man ein Gamepad (z.B. für Droidemu) anschließen kann?

Das sollte ja eigentlich möglich sein, schließlich funktionieren ja auch Maus und Tastatur.

Robert sagt:

Weiß jemand wo man einen Akku dafür herbekommt meiner spinnt und fällt nach dem Laden auf 70%.

[…] things that would be helpful in the dev of roms that work for each of the 3 models. Here's an example of the "dmesg" output for a similar infoTM device that applications like Electric Sheep's "Android System Info" […]

Schreibe einen Kommentar

Captcha * Time limit is exhausted. Please reload CAPTCHA.