Linkstation Live (LS-CHL)

In Computer und Netzwerk Linkstation Live (LS-CHL) V1, V2 und V3 | Erstellt: 18.10.2010, 18:33 | Editiert: 25.10.2018, 16:44 | 19.087 mal angesehen | Seite drucken

Technische Daten und Bilder der "Buffalo Linkstation Live V1", die mit dem ursprünglich "blauen" Web-Interface.

Übersicht

  • CPU: "ARM926EJ-S rev 0 (v5l)", 88F5182-A2, 266MHz
  • RAM: 128MB
  • LAN: 1x GBit
  • Platte: 250GB Samsung

cat /proc/cpuinfo

Processor       : ARM926EJ-S rev 0 (v5l)
BogoMIPS        : 266.24
Features        : swp half thumb fastmult edsp
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
CPU part        : 0x926
CPU revision    : 0
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 1
I line length   : 32
I sets          : 1024
D size          : 32768
D assoc         : 1
D line length   : 32
D sets          : 1024

Hardware        : Feroceon
Revision        : 0000
Serial          : 0000000000000000

cat /proc/meminfo

MemTotal:       125784 kB
MemFree:         80528 kB
Buffers:          1792 kB
Cached:          27420 kB
SwapCached:          0 kB
Active:          19384 kB
Inactive:        17284 kB
SwapTotal:     1959888 kB
SwapFree:      1959888 kB
Dirty:               8 kB
Writeback:           0 kB
AnonPages:        7472 kB
Mapped:           7916 kB
Slab:             5876 kB
SReclaimable:      968 kB
SUnreclaim:       4908 kB
PageTables:        668 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:   2022780 kB
Committed_AS:    38948 kB
VmallocTotal:   385024 kB
VmallocUsed:      9160 kB
VmallocChunk:   368636 kB

dmesg

Linux version 2.6.22.7 (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #369 Mon Feb 23 17:13:17 JST 2009
CPU: ARM926EJ-S [41069260] revision 0 (ARMv5TEJ), cr=a0053177
Machine: Feroceon
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 32768
  DMA zone: 256 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 32512 pages, LIFO batch:7
  Normal zone: 0 pages used for memmap
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets
Built 1 zonelists.  Total pages: 32512
Kernel command line: netconsole=6666@192.168.11.150/,@192.168.11.149/ root=/dev/sda2 rw
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB 0MB 0MB 0MB = 128MB total
Memory: 125568KB available (3828K code, 294K data, 120K init)
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
env_format_version = 0x00000006
product_id = 0x00000010
Sys Clk = 200000000, Tclk = 166664740

CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 128MB 
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB 
PEX0_IO ....base f2000000, size   1MB 
PCI0_MEM ....base e8000000, size 128MB 
PCI0_IO ....base f2100000, size   1MB 
INTER_REGS ....base f1000000, size   1MB 
DEVICE_CS0 ....no such
DEVICE_CS1 ....base f4000000, size  32MB 
DEVICE_CS2 ....no such
DEV_BOOCS ....base ff800000, size   8MB 
CRYPT_ENG ....base f0000000, size  64KB 

  Marvell Development Board (LSP Version 3.0.5_NAS_GDP_p8)-- BUFFALO_BOARD  Soc: 88F5182 A2

 Detected Tclk 166664740 and SysClk 200000000 
Marvell USB EHCI Host controller #0: c0576600
Marvell USB EHCI Host controller #1: c0576400
IO Request resource failed - Pci If 0
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
Time: orion_clocksource clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
RTC registered
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Use the XOR engines (acceleration) for enhancing the following functions:
  o RAID 5 Xor calculation
  o kernel memcpy
  o kenrel memzero
  o copy user to/from kernel buffers
Number of XOR engines to use: 2
Use IDMA channels 2 and 3 for enhancing the following function:
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
serial8250.0: ttyS2 at MMIO 0xf1012100 (irq = 4) is a 16550A
RAMDISK driver initialized: 3 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Marvell Ethernet Driver 'mv_ethernet':
  o Uncached descriptors in DRAM
  o DRAM SW cache-coherency
  o TCP segmentation offload enabled
  o Checksum offload enabled
  o Rx desc: 128
  o Tx desc: 256
  o Loading network interface ** eth_init_module (0)
'eth0' 
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access     SAMSUNG  HD252HJ          1AC0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
physmap platform flash device: 01000000 at f0000000
CFI: Found no physmap-flash.0 device at location zero
JEDEC: Found no physmap-flash.0 device at location zero
physmap-flash physmap-flash.0: map_probe failed
CFI: Found no cfi_flash_0 device at location zero
Found: SST 39LF020
cfi_flash_0: Found 1 x8 devices at 0x0 in 8-bit bank
cfi_flash_0: Found an alias at 0x40000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x80000 for the chip at 0x0
cfi_flash_0: Found an alias at 0xc0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x100000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x140000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x180000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x1c0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x200000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x240000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x280000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x2c0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x300000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x340000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x380000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x3c0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x400000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x440000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x480000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x4c0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x500000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x540000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x580000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x5c0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x600000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x640000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x680000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x6c0000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x700000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x740000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x780000 for the chip at 0x0
cfi_flash_0: Found an alias at 0x7c0000 for the chip at 0x0
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
CFI: Found no cfi_flash_1 device at location zero
JEDEC: Found no cfi_flash_1 device at location zero
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1     21 MB/s
raid6: int32x2     28 MB/s
raid6: int32x4     35 MB/s
raid6: int32x8     31 MB/s
raid6: using algorithm int32x4 (35 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: measuring checksumming speed
   arm4regs  :   304.000 MB/sec
   8regs     :   249.200 MB/sec
   32regs    :   270.800 MB/sec
raid5: using function: arm4regs (304.000 MB/sec)
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing init memory: 120K
Adding 1959888k swap on /dev/sda5.  Priority:-1 extents:1 across:1959888k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth reg(9) val=0x0300
eth0: link down
eth0: link up, full duplex, speed 1 Gbps

fw_printenv

bootargs=$(bootargs_base) $(bootargs_root)
baudrate=115200
loads_echo=0
ipaddr=192.168.11.150
serverip=192.168.11.1
rootpath=/nfs/arm
cpuName=926
CASset=min
MALLOC_len=4
bootargs_end=:::DB88FXX81:eth0:none
ethact=egiga0
ethaddr=00:1D:73:A4:28:B5
stdin=serial
stdout=serial
stderr=serial
enaMonExt=no
enaFlashBuf=yes
enaCpuStream=no
ethprime=egiga0
buffalo_ver=BOOTVER=1.22
buffalo_minor_ver=BOOT_MINOR_VER=1.00
build_time=14:54:28
initrd=initrd.buffalo
kernel=uImage.buffalo
bootargs_base=console=ttyS0,115200
bootargs_root=root=/dev/sda2 rw initrd=0x00800040,15M panic=5
def_tftp=tftp 0x00100000 $(kernel); tftp 0x00800000 $(initrd); setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) tftpboot=yes; bootm 0x00100000 0x00800000
bootdelay=3
disaMvPnp=no
overEthAddr=no
usb0Mode=host
usb1Mode=host
bootcmd=ide reset ; ext2load ide 0:1 0x00100000 /uImage ; setenv bootargs netconsole=6666@192.168.11.150/,@192.168.11.149/ root=/dev/sda2 rw ; bootm 0x00100000

U-Boot lädt hier den Kernel uImage von sda1

cat /proc/buffalo/board_info

BoardId=f0
BoardName=BUFFALO_BOARD
BoardStrap=33

cat /proc/buffalo/firmware

SERIES=LinkStation
PRODUCTNAME=LS-CHL(HANZEI)
VERSION=0.16
SUBVERSION=FLASH 0.00
PRODUCTID=0x00000010
BUILDDATE=2009/02/23 17:13:14

Die Informationen und Control-Dateien in /proc/buffalo/ sind nur mit einem "Stock"-Kernel einer Buffalo-Firmware verfügbar. Bei mir

uname -a

Linux linkstation2 2.6.22.7 #369 Mon Feb 23 17:13:17 JST 2009 armv5tejl GNU/Linux

Mehr Info auf der Seite Debian-Installation.

Bilder

Merkmale von außen:

  • "Buffalo"-Schriftzug auf den Seiten in silber
  • Nach innen versetzte USB- und LAN-Buchse
  • Einzeiliger Seriennummern-Aufkleber ohne Barcode auf der Unterseite

Weitere Seiten in 'Linkstation Live (LS-CHL) V1, V2 und V3'

Kommentare (3)

Philip sagt:

Hallo,

ich habe das Problem, dass ich nicht weiß, wie man diesen Nas öffnet.

Ich wäre über eine kurze Anleitung sehr sehr dankbar. Sie dürfen mir gerne auch eine Email schreiben.

Gruß

Stefan sagt:

Aloha! Unter den Aufklebern auf der Unterseite sind 2 Schnappverschlüsse,

http://www.yamasita.jp/linkstation/2008/11/081112__disassemble.html

Großes Bild:

http://www.yamasita.jp/linkstation/2009/09/090912_4l.jpg

Das Gehäuse ist rundherum nur geschnappt bis auf die (obere) Schraube, die den Lüfter hält.

Die 2 Laschen unten brechen eigentlich immer beim Öffnen, ansonsten bleibt die Hülle mit etwas "vorsichtiger Gewalt heile.

Philip sagt:

Schon mal bessten Dank, habe ich mich da gerade auf deinen Bildern verguckt? Ich habe gesehen (in einem anderen Eintrag), das du auch den Vorgänger, die V1, besitzt. Diese besitze ich auch.

Sie hat nur unten und auf der Seite einen Schlitz mit einem Loch.

Und genau daran verzweifele ich momentan.

Gruß

Schreibe einen Kommentar

Captcha * Time limit is exhausted. Please reload CAPTCHA.