Sonst scheint alles zu Laufen…

1x Eolize SVD-NC11-4 Mini-ITX Gehäuse mit 4x SATA

1x MSI E350IS-E45 Mainboard

1x LSI/3Ware 9650SE-4LP – Controller

Plus 4GB Kingston DDR3 (KVR1066D3N7K2/4G) plus die 4 vorhandenen Western Digital WD20EARS Platten.

Dazu ein 64Bit-Debian und los geht’s – sobald Amazon alles geliefert hat. Eine BBU für den 3Ware-Controller gibt es dann demnächst™ mal dazu.

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.13
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.06
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.09
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.09
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 4
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 0
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.11
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 5
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 1
cpu cores : 4
apicid : 5
initial apicid : 5
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.10
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 6
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 2
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.11
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 7
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Xeon(R) CPU E5310 @ 1.60GHz
stepping : 7
cpu MHz : 1596.065
cache size : 4096 KB
physical id : 1
siblings : 4
core id : 3
cpu cores : 4
apicid : 7
initial apicid : 7
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx tm2 ssse3 cx16 xtpr pdcm dca lahf_lm tpr_shadow
bogomips : 3192.10
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

Hier, ab dem Absatz “Partitionieren und Dateisysteme”.

Kurzzusammenfassung: Partitionieren, Filesysteme erstellen, mounten, Tarballs entpacken, einige Anpassungen vornehmen, Platte in die Linkstation stecken.

Bei Ordnern mit Bildern (~4MB/Datei):

Acronis Image (~10GB):

Also rund 50MB/s. Noch ausbaufähig – Jumbo Frames, ick hör’ dir trapsen…

root@n36l /data # dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-2-686-pae (Debian 2.6.39-3) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 03:48:49 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037f90000 (usable)
[    0.000000]  BIOS-e820: 0000000037f9e000 - 0000000037fa0000 (reserved)
[    0.000000]  BIOS-e820: 0000000037fa0000 - 0000000037fae000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037fae000 - 0000000037fe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037fe0000 - 0000000038000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: HP ProLiant MicroServer, BIOS O41     09/30/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x37f90 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 36e72000 - 37731000
[    0.000000] ACPI: RSDP 000f8f50 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 37fa0100 0007C (v01 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: FACP 37fa0290 000F4 (v03 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: DSDT 37fa0620 06947 (v01 HP     ProLiant 00000006 INTL 20051117)
[    0.000000] ACPI: FACS 37fae000 00040
[    0.000000] ACPI: APIC 37fa0390 00072 (v01 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: MCFG 37fa0410 0003C (v01 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: SPMI 37fa0450 00041 (v05 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: OEMB 37fae040 00072 (v01 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: HPET 37fab4e0 00038 (v01 HP     ProLiant 20100930 HP   00000097)
[    0.000000] ACPI: EINJ 37fab520 00130 (v01  AMIER AMI_EINJ 20100930 HP   00000097)
[    0.000000] ACPI: BERT 37fab6b0 00030 (v01  AMIER AMI_BERT 20100930 HP   00000097)
[    0.000000] ACPI: ERST 37fab6e0 001B0 (v01  AMIER AMI_ERST 20100930 HP   00000097)
[    0.000000] ACPI: HEST 37fab890 000A8 (v01  AMIER ABC_HEST 20100930 HP   00000097)
[    0.000000] ACPI: SSDT 37fab940 00386 (v01 HP     ProLiant 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 5MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x00037f90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00037f90
[    0.000000] On node 0 totalpages: 229150
[    0.000000] free_area_init_node: node 0, pgdat c14187c0, node_mem_map f6772200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 12 pages used for memmap
[    0.000000]   HighMem zone: 1414 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 38000000 (gap: 38000000:a8000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s30976 r0 d22272 u524288
[    0.000000] pcpu-alloc: s30976 r0 d22272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227358
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae root=UUID=a636812a-be3a-4cb0-9083-f72854f780a7 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:00037f90)
[    0.000000] Memory: 894136k/917056k available (2784k kernel code, 22464k reserved, 1435k data, 440k init, 5704k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1420000 - 0xc148e000   ( 440 kB)
[    0.000000]       .data : 0xc12b8340 - 0xc141f240   (1435 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12b8340   (2784 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1297.888 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.77 BogoMIPS (lpj=5191552)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004074] Security Framework initialized
[    0.004079] SELinux:  Disabled at boot.
[    0.004112] Mount-cache hash table entries: 512
[    0.008131] Initializing cgroup subsys ns
[    0.008136] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.008141] Initializing cgroup subsys cpuacct
[    0.008179] Initializing cgroup subsys memory
[    0.008200] Initializing cgroup subsys devices
[    0.008203] Initializing cgroup subsys freezer
[    0.008207] Initializing cgroup subsys net_cls
[    0.008210] Initializing cgroup subsys blkio
[    0.008246] CPU: Physical Processor ID: 0
[    0.008249] CPU: Processor Core ID: 0
[    0.008254] mce: CPU supports 6 MCE banks
[    0.008266] using C1E aware idle routine
[    0.009591] ACPI: Core revision 20110316
[    0.015066] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.015377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055478] CPU0: AMD Athlon(tm) II Neo N36L Dual-Core Processor stepping 03
[    0.056003] Performance Events: AMD PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      4
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000000f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] CPU 1 irqstacks, hard=f6096000 soft=f6098000
[    0.056003] Booting Node   0, Processors  #1
[    0.056003] smpboot cpu 1: start_ip = 9a000
[    0.008000] Initializing CPU#1
[    0.144030] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144062] Brought up 2 CPUs
[    0.144066] Total of 2 processors activated (5191.36 BogoMIPS).
[    0.144058] System has AMD C1E enabled
[    0.144067] Switch to broadcast mode on CPU1
[    0.144773] Switch to broadcast mode on CPU0
[    0.144773] devtmpfs: initialized
[    0.144773] PM: Registering ACPI NVS region at 37fae000 (204800 bytes)
[    0.144773] print_constraints: dummy:
[    0.144773] NET: Registered protocol family 16
[    0.144773] node 0 link 0: io port [1000, ffffff]
[    0.144773] TOM: 0000000040000000 aka 1024M
[    0.144773] Fam 10h mmconf [e0000000, efffffff]
[    0.144773] node 0 link 0: mmio [a0000, bffff]
[    0.144773] node 0 link 0: mmio [40000000, dfffffff]
[    0.144773] node 0 link 0: mmio [e0000000, f7ffffff] ==> [f0000000, f7ffffff]
[    0.144773] node 0 link 0: mmio [f8000000, fe6fffff]
[    0.144773] node 0 link 0: mmio [fe700000, fe8fffff]
[    0.144773] node 0 link 0: mmio [fe900000, ffdfffff]
[    0.144773] bus: [00, 1f] on node 0 link 0
[    0.144773] bus: 00 index 0 [io  0x0000-0xffff]
[    0.144773] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.144773] bus: 00 index 2 [mem 0x40000000-0xdfffffff]
[    0.144773] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
[    0.144773] Extended Config Space enabled on 1 nodes
[    0.144773] ACPI: bus type pci registered
[    0.144823] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.144828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.144832] PCI: Using MMCONFIG for extended config space
[    0.144835] PCI: Using configuration type 1 for base access
[    0.145234] bio: create slab  at 0
[    0.145234] ACPI: EC: Look up EC in DSDT
[    0.145234] \_SB_:_OSC evaluation returned wrong type
[    0.145234] _OSC request data:1 7
[    0.145509] ACPI: Executed 2 blocks of module-level executable AML code
[    0.148727] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.160139] ACPI: OEMN 37faaeb0 00624 (v01 AMD    NAHP     00000001 INTL 20051117)
[    0.160433] ACPI: Dynamic OEM Table Load:
[    0.160437] ACPI: OEMN   (null) 00624 (v01 AMD    NAHP     00000001 INTL 20051117)
[    0.172453] ACPI: Interpreter enabled
[    0.172462] ACPI: (supports S0 S4 S5)
[    0.172494] ACPI: Using IOAPIC for interrupt routing
[    0.178142] ACPI: No dock devices found.
[    0.178189] HEST: Table parsing has been initialized.
[    0.178195] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.179074] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.179852] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.179858] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.179862] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.179867] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.179871] pci_root PNP0A08:00: host bridge window [mem 0x38000000-0xdfffffff]
[    0.179876] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.179880] pci_root PNP0A08:00: host bridge window [mem 0x38000000-0xdfffffff]
[    0.179884] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[    0.179891] pci_root PNP0A08:00: host bridge window expanded to [mem 0x38000000-0xdfffffff]; [mem 0x38000000-0xdfffffff] ignored
[    0.179897] pci_root PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xffffffff] ignored
[    0.179906] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000cf000-0x000d19ff]
[    0.179987] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[    0.180076] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
[    0.180132] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.180173] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.180178] pci 0000:00:06.0: PME# disabled
[    0.180221] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.180247] pci 0000:00:11.0: reg 10: [io  0xd000-0xd007]
[    0.180260] pci 0000:00:11.0: reg 14: [io  0xc000-0xc003]
[    0.180272] pci 0000:00:11.0: reg 18: [io  0xb000-0xb007]
[    0.180285] pci 0000:00:11.0: reg 1c: [io  0xa000-0xa003]
[    0.180297] pci 0000:00:11.0: reg 20: [io  0x9000-0x900f]
[    0.180310] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff]
[    0.180376] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.180393] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff]
[    0.180474] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.180498] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff]
[    0.180577] pci 0000:00:12.2: supports D1 D2
[    0.180581] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.180587] pci 0000:00:12.2: PME# disabled
[    0.180614] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.180631] pci 0000:00:13.0: reg 10: [mem 0xfe6fd000-0xfe6fdfff]
[    0.180711] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.180734] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff]
[    0.180814] pci 0000:00:13.2: supports D1 D2
[    0.180817] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.180823] pci 0000:00:13.2: PME# disabled
[    0.180850] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.180934] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.180950] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.180963] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.180975] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.180988] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.181000] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
[    0.181045] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.181131] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.181185] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.181202] pci 0000:00:16.0: reg 10: [mem 0xfe6fc000-0xfe6fcfff]
[    0.181283] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.181307] pci 0000:00:16.2: reg 10: [mem 0xfe6ff000-0xfe6ff0ff]
[    0.181386] pci 0000:00:16.2: supports D1 D2
[    0.181390] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.181395] pci 0000:00:16.2: PME# disabled
[    0.181421] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.181446] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.181468] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.181490] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.181516] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.181581] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
[    0.181594] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.181603] pci 0000:01:05.0: reg 14: [io  0xe000-0xe0ff]
[    0.181611] pci 0000:01:05.0: reg 18: [mem 0xfe8f0000-0xfe8fffff]
[    0.181627] pci 0000:01:05.0: reg 24: [mem 0xfe700000-0xfe7fffff]
[    0.181646] pci 0000:01:05.0: supports D1 D2
[    0.181698] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.181704] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.181709] pci 0000:00:01.0:   bridge window [mem 0xfe700000-0xfe8fffff]
[    0.181716] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.181776] pci 0000:02:00.0: [14e4:165b] type 0 class 0x000200
[    0.181800] pci 0000:02:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[    0.181891] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.181897] pci 0000:02:00.0: PME# disabled
[    0.192065] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[    0.192075] pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.192082] pci 0000:00:06.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.192089] pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.192171] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[    0.192178] pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
[    0.192184] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.192191] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.192196] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.192201] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.192205] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.192210] pci 0000:00:14.4:   bridge window [mem 0x38000000-0xdfffffff] (subtractive decode)
[    0.192215] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[    0.192232] pci_bus 0000:00: on NUMA node 0
[    0.192240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.192545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.192608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[    0.192898]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.193172]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.200242] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.200330] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.200417] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.200502] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.200570] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.200622] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.200674] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.200726] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.200869] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.200874] vgaarb: loaded
[    0.200921] PCI: Using ACPI for IRQ routing
[    0.200926] PCI: pci_cache_line_size set to 64 bytes
[    0.201017] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[    0.201021] reserve RAM buffer: 0000000037f90000 - 0000000037ffffff
[    0.201189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.201196] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.203242] Switching to clocksource hpet
[    0.204775] Switched to NOHz mode on CPU #1
[    0.204801] Switched to NOHz mode on CPU #0
[    0.205618] pnp: PnP ACPI init
[    0.205637] ACPI: bus type pnp registered
[    0.206063] pnp 00:00: [bus 00-ff]
[    0.206067] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.206071] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.206075] pnp 00:00: [io  0x0d00-0xffff window]
[    0.206079] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.206083] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.206087] pnp 00:00: [mem 0x38000000-0xdfffffff window]
[    0.206091] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.206094] pnp 00:00: [mem 0x38000000-0xdfffffff window]
[    0.206098] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    0.206160] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.206312] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.206317] pnp 00:01: [mem 0x38000000-0x3fffffff]
[    0.206374] system 00:01: [mem 0x38000000-0x3fffffff] has been reserved
[    0.206380] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206455] pnp 00:02: [dma 4]
[    0.206459] pnp 00:02: [io  0x0000-0x000f]
[    0.206462] pnp 00:02: [io  0x0081-0x0083]
[    0.206466] pnp 00:02: [io  0x0087]
[    0.206469] pnp 00:02: [io  0x0089-0x008b]
[    0.206472] pnp 00:02: [io  0x008f]
[    0.206476] pnp 00:02: [io  0x00c0-0x00df]
[    0.206517] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.206532] pnp 00:03: [io  0x0070-0x0071]
[    0.206544] pnp 00:03: [irq 8]
[    0.206586] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.206643] pnp 00:04: [io  0x0061]
[    0.206683] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.206696] pnp 00:05: [io  0x00f0-0x00ff]
[    0.206707] pnp 00:05: [irq 13]
[    0.206747] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.206782] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[    0.206825] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.206937] pnp 00:07: [io  0x0060]
[    0.206941] pnp 00:07: [io  0x0064]
[    0.206944] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[    0.206948] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[    0.207016] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.207021] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.207027] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207228] pnp 00:08: [io  0x0010-0x001f]
[    0.207231] pnp 00:08: [io  0x0022-0x003f]
[    0.207235] pnp 00:08: [io  0x0062-0x0063]
[    0.207238] pnp 00:08: [io  0x0065-0x006f]
[    0.207242] pnp 00:08: [io  0x0072-0x007f]
[    0.207245] pnp 00:08: [io  0x0080]
[    0.207248] pnp 00:08: [io  0x0084-0x0086]
[    0.207252] pnp 00:08: [io  0x0088]
[    0.207255] pnp 00:08: [io  0x008c-0x008e]
[    0.207258] pnp 00:08: [io  0x0090-0x009f]
[    0.207262] pnp 00:08: [io  0x00a2-0x00bf]
[    0.207265] pnp 00:08: [io  0x00b1]
[    0.207268] pnp 00:08: [io  0x00e0-0x00ef]
[    0.207272] pnp 00:08: [io  0x04d0-0x04d1]
[    0.207275] pnp 00:08: [io  0x040b]
[    0.207278] pnp 00:08: [io  0x04d6]
[    0.207281] pnp 00:08: [io  0x0c00-0x0c01]
[    0.207285] pnp 00:08: [io  0x0c14]
[    0.207288] pnp 00:08: [io  0x0c50-0x0c51]
[    0.207291] pnp 00:08: [io  0x0c52]
[    0.207294] pnp 00:08: [io  0x0c6c]
[    0.207297] pnp 00:08: [io  0x0c6f]
[    0.207301] pnp 00:08: [io  0x0cd0-0x0cd1]
[    0.207306] pnp 00:08: [io  0x0cd2-0x0cd3]
[    0.207309] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.207313] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.207316] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.207320] pnp 00:08: [io  0x0800-0x089f]
[    0.207324] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.207328] pnp 00:08: [io  0x0b00-0x0b1f]
[    0.207331] pnp 00:08: [io  0x0b20-0x0b3f]
[    0.207334] pnp 00:08: [io  0x0900-0x090f]
[    0.207338] pnp 00:08: [io  0x0910-0x091f]
[    0.207341] pnp 00:08: [io  0xfe00-0xfefe]
[    0.207345] pnp 00:08: [io  0x0060]
[    0.207348] pnp 00:08: [io  0x0064]
[    0.207351] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[    0.207355] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[    0.207359] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[    0.207363] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.207484] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.207489] system 00:08: [io  0x040b] has been reserved
[    0.207494] system 00:08: [io  0x04d6] has been reserved
[    0.207499] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.207503] system 00:08: [io  0x0c14] has been reserved
[    0.207508] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.207512] system 00:08: [io  0x0c52] has been reserved
[    0.207517] system 00:08: [io  0x0c6c] has been reserved
[    0.207521] system 00:08: [io  0x0c6f] has been reserved
[    0.207526] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.207531] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.207535] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.207540] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.207545] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.207549] system 00:08: [io  0x0800-0x089f] has been reserved
[    0.207554] system 00:08: [io  0x0b00-0x0b1f] has been reserved
[    0.207559] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.207564] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.207569] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.207574] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.207580] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.207585] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.207590] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.207596] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207657] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.207720] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.207725] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207860] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[    0.207864] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.207869] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[    0.207873] pnp 00:0a: [mem 0x00100000-0x37ffffff]
[    0.207876] pnp 00:0a: [mem 0xfec00000-0xffffffff]
[    0.207947] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.207952] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.207958] system 00:0a: [mem 0x00100000-0x37ffffff] could not be reserved
[    0.207963] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.207968] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.208126] pnp: PnP ACPI: found 11 devices
[    0.208129] ACPI: ACPI bus type pnp unregistered
[    0.208133] PnPBIOS: Disabled by ACPI PNP
[    0.244918] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.244923] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.244930] pci 0000:00:01.0:   bridge window [mem 0xfe700000-0xfe8fffff]
[    0.244936] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.244942] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[    0.244946] pci 0000:00:06.0:   bridge window [io  disabled]
[    0.244952] pci 0000:00:06.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.244957] pci 0000:00:06.0:   bridge window [mem pref disabled]
[    0.244963] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.244967] pci 0000:00:14.4:   bridge window [io  disabled]
[    0.244974] pci 0000:00:14.4:   bridge window [mem disabled]
[    0.244980] pci 0000:00:14.4:   bridge window [mem pref disabled]
[    0.245003] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.245009] pci 0000:00:06.0: setting latency timer to 64
[    0.245020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.245024] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.245028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.245033] pci_bus 0000:00: resource 7 [mem 0x38000000-0xdfffffff]
[    0.245037] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
[    0.245042] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.245046] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
[    0.245050] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.245055] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.245060] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.245064] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.245068] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.245072] pci_bus 0000:03: resource 7 [mem 0x38000000-0xdfffffff]
[    0.245077] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xffffffff]
[    0.245175] NET: Registered protocol family 2
[    0.245335] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.245770] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.246601] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.247023] TCP: Hash tables configured (established 131072 bind 65536)
[    0.247028] TCP reno registered
[    0.247033] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.247049] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.247399] NET: Registered protocol family 1
[    0.247416] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.060161] pci 0000:01:05.0: Boot video device
[    1.060170] PCI: CLS 64 bytes, default 64
[    1.060239] Unpacking initramfs...
[    1.478140] Freeing initrd memory: 8956k freed
[    1.484077] audit: initializing netlink socket (disabled)
[    1.484102] type=2000 audit(1311671036.480:1): initialized
[    1.514906] highmem bounce pool size: 64 pages
[    1.514915] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.515308] VFS: Disk quotas dquot_6.5.2
[    1.515442] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.515625] msgmni has been set to 1752
[    1.516058] alg: No test for stdrng (krng)
[    1.516119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.516125] io scheduler noop registered
[    1.516128] io scheduler deadline registered
[    1.516154] io scheduler cfq registered (default)
[    1.516285] pcieport 0000:00:06.0: setting latency timer to 64
[    1.516324] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
[    1.516441] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[    1.516446] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.516452] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[    1.516581] APEI: Can not request iomem region <0000000037fc21ea-0000000037fc21ec> for GARs.
[    1.516648] isapnp: Scanning for PnP cards...
[    1.875844] isapnp: No Plug & Play device found
[    1.875934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.900610] Linux agpgart interface v0.103
[    1.901056] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.901921] i8042: No controller found
[    1.902036] mousedev: PS/2 mouse device common for all mice
[    1.902093] rtc_cmos 00:03: RTC can wake from S4
[    1.908304] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.908338] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.908360] cpuidle: using governor ladder
[    1.908364] cpuidle: using governor menu
[    1.908735] TCP cubic registered
[    1.908831] NET: Registered protocol family 10
[    1.909882] Mobile IPv6
[    1.909886] NET: Registered protocol family 17
[    1.909892] Registering the dns_resolver key type
[    1.909917] Using IPI No-Shortcut mode
[    1.910021] PM: Hibernation image not present or could not be loaded.
[    1.910036] registered taskstats version 1
[    1.910956] rtc_cmos 00:03: setting system clock to 2011-07-26 09:03:57 UTC (1311671037)
[    1.910995] Initializing network drop monitor service
[    1.911137] Freeing unused kernel memory: 440k freed
[    1.911379] Write protecting the kernel text: 2788k
[    1.911423] Write protecting the kernel read-only data: 1032k
[    1.911426] NX-protecting the kernel data: 3356k
[    1.935022] udevd[47]: starting version 171
[    2.083267] tg3.c:v3.117 (January 25, 2011)
[    2.083290] tg3 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.083303] tg3 0000:02:00.0: setting latency timer to 64
[    2.099203] SCSI subsystem initialized
[    2.123559] usbcore: registered new interface driver usbfs
[    2.123593] usbcore: registered new interface driver hub
[    2.128142] usbcore: registered new device driver usb
[    2.144604] libata version 3.00 loaded.
[    2.154307] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.154388] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.154414] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.154467] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.172124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.172458] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.172480] QUIRK: Enable AMD PLL fix
[    2.172498] ehci_hcd 0000:00:12.2: debug port 1
[    2.172533] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800
[    2.184107] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.184165] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.184170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.184174] usb usb1: Product: EHCI Host Controller
[    2.184177] usb usb1: Manufacturer: Linux 2.6.39-2-686-pae ehci_hcd
[    2.184180] usb usb1: SerialNumber: 0000:00:12.2
[    2.184902] hub 1-0:1.0: USB hub found
[    2.184909] hub 1-0:1.0: 5 ports detected
[    2.185044] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.185082] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    2.185606] scsi0 : pata_atiixp
[    2.189037] scsi1 : pata_atiixp
[    2.190084] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    2.190089] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    2.190155] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.190182] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.190197] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[    2.194970] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address 3c:4a:92:xx:xx:xx
[    2.194977] tg3 0000:02:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    2.194983] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.194988] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.204193] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe6fe000
[    2.268154] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.268160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.268165] usb usb2: Product: OHCI Host Controller
[    2.268168] usb usb2: Manufacturer: Linux 2.6.39-2-686-pae ohci_hcd
[    2.268171] usb usb2: SerialNumber: 0000:00:12.0
[    2.268372] hub 2-0:1.0: USB hub found
[    2.268381] hub 2-0:1.0: 5 ports detected
[    2.268496] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.268521] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.268532] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
[    2.280145] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fd000
[    2.340153] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.340159] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.340163] usb usb3: Product: OHCI Host Controller
[    2.340166] usb usb3: Manufacturer: Linux 2.6.39-2-686-pae ohci_hcd
[    2.340169] usb usb3: SerialNumber: 0000:00:13.0
[    2.340357] hub 3-0:1.0: USB hub found
[    2.340368] hub 3-0:1.0: 5 ports detected
[    2.340486] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.340510] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    2.340521] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 4
[    2.366702] ata1.01: ATA-8: VB0250EAVER, HPG0, max UDMA/100
[    2.366708] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.366716] ata1.01: limited to UDMA/33 due to 40-wire cable
[    2.372194] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe6fc000
[    2.380511] ata1.01: configured for UDMA/33
[    2.380859] scsi 0:0:1:0: Direct-Access     ATA      VB0250EAVER      HPG0 PQ: 0 ANSI: 5
[    2.432152] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.432159] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.432163] usb usb4: Product: OHCI Host Controller
[    2.432167] usb usb4: Manufacturer: Linux 2.6.39-2-686-pae ohci_hcd
[    2.432170] usb usb4: SerialNumber: 0000:00:16.0
[    2.432364] hub 4-0:1.0: USB hub found
[    2.432373] hub 4-0:1.0: 4 ports detected
[    2.432514] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.432554] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.432589] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5
[    2.440162] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.440208] ehci_hcd 0000:00:13.2: debug port 1
[    2.440230] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe6ff400
[    2.452143] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.452183] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.452187] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.452191] usb usb5: Product: EHCI Host Controller
[    2.452194] usb usb5: Manufacturer: Linux 2.6.39-2-686-pae ehci_hcd
[    2.452197] usb usb5: SerialNumber: 0000:00:13.2
[    2.452395] hub 5-0:1.0: USB hub found
[    2.452402] hub 5-0:1.0: 5 ports detected
[    2.452518] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.452546] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    2.452557] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 6
[    2.464146] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.464192] ehci_hcd 0000:00:16.2: debug port 1
[    2.464213] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe6ff000
[    2.476130] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.476169] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    2.476173] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.476177] usb usb6: Product: EHCI Host Controller
[    2.476180] usb usb6: Manufacturer: Linux 2.6.39-2-686-pae ehci_hcd
[    2.476183] usb usb6: SerialNumber: 0000:00:16.2
[    2.476373] hub 6-0:1.0: USB hub found
[    2.476381] hub 6-0:1.0: 4 ports detected
[    2.476831] ahci 0000:00:11.0: version 3.0
[    2.476858] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.476923] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[    2.477025] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.477032] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    2.479423] scsi2 : ahci
[    2.479526] scsi3 : ahci
[    2.480085] Refined TSC clocksource calibration: 1297.838 MHz.
[    2.480096] Switching to clocksource tsc
[    2.481569] scsi4 : ahci
[    2.482964] scsi5 : ahci
[    2.483111] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 41
[    2.483117] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 41
[    2.483123] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 41
[    2.483128] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 41
[    2.489041] sd 0:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.489095] sd 0:0:1:0: [sda] Write Protect is off
[    2.489100] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.489123] sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.518864]  sda: sda1 sda2
[    2.519267] sd 0:0:1:0: [sda] Attached SCSI disk
[    2.708126] usb 2-5: new low speed USB device number 2 using ohci_hcd
[    2.881230] usb 2-5: New USB device found, idVendor=03f0, idProduct=0024
[    2.881237] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.881242] usb 2-5: Product: HP Basic USB Keyboard
[    2.881245] usb 2-5: Manufacturer: CHICONY
[    2.972124] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.972158] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.972182] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.972205] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.973658] ata4.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133
[    2.973664] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.973690] ata6.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3EA, max UDMA/133
[    2.973698] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.973723] ata3.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133
[    2.973729] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.973869] ata5.00: ATA-8: Hitachi HDS722020ALA330, JKAOA28A, max UDMA/133
[    2.973876] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.975311] ata4.00: configured for UDMA/133
[    2.975344] ata3.00: configured for UDMA/133
[    2.975360] ata6.00: configured for UDMA/133
[    2.975641] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[    2.975898] ata5.00: configured for UDMA/133
[    2.976092] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.976098] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[    2.976220] sd 2:0:0:0: [sdb] Write Protect is off
[    2.976225] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.976300] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.976344] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.976403] sd 3:0:0:0: [sdc] Write Protect is off
[    2.976408] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.976433] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.976584] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[    2.976760] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.976817] sd 4:0:0:0: [sdd] Write Protect is off
[    2.976822] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.976952] scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[    2.977181] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.977407] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.977462] sd 5:0:0:0: [sde] Write Protect is off
[    2.977466] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    2.977490] sd 5:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.010508]  sdb:
[    3.011190] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.015877]  sde:
[    3.016387] sd 5:0:0:0: [sde] Attached SCSI disk
[    3.016715]  sdd:
[    3.017425] sd 4:0:0:0: [sdd] Attached SCSI disk
[    3.018672]  sdc:
[    3.019339] sd 3:0:0:0: [sdc] Attached SCSI disk
[    3.048291] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb2/2-5/2-5:1.0/input/input0
[    3.048396] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:12.0-5/input0
[    3.048424] usbcore: registered new interface driver usbhid
[    3.048427] usbhid: USB HID core driver
[    3.458063] PM: Starting manual resume from disk
[    3.458070] PM: Hibernation image partition 8:2 present
[    3.458073] PM: Looking for hibernation image.
[    3.467893] PM: Image not found (code -22)
[    3.467898] PM: Hibernation image not present or could not be loaded.
[    3.516462] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.304883] udevd[298]: starting version 171
[    4.554710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.568353] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.609226] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.609235] ACPI: Power Button [PWRB]
[    4.609332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.609337] ACPI: Power Button [PWRF]
[    4.640244] ACPI: acpi_idle registered with cpuidle
[    4.640306] ACPI: processor limited to max C-state 1
[    4.642084] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.726173] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    4.738375] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[    4.791865] [drm] Initialized drm 1.1.0 20060810
[    5.098125] [drm] radeon defaulting to kernel modesetting.
[    5.098130] [drm] radeon kernel modesetting enabled.
[    5.098232] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.098239] radeon 0000:01:05.0: setting latency timer to 64
[    5.098460] [drm] initializing kernel modesetting (RS880 0x1002:0x9712).
[    5.098494] [drm] register mmio base: 0xFE8F0000
[    5.098497] [drm] register mmio size: 65536
[    5.105204] ATOM BIOS: AMD_1407_150
[    5.105238] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
[    5.105243] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[    5.105642] [drm] Detected VRAM RAM=128M, BAR=128M
[    5.105648] [drm] RAM width 32bits DDR
[    5.105767] [TTM] Zone  kernel: Available graphics memory: 448914 kiB.
[    5.105772] [TTM] Zone highmem: Available graphics memory: 451766 kiB.
[    5.105776] [TTM] Initializing pool allocator.
[    5.105819] [drm] radeon: 128M of VRAM memory ready
[    5.105823] [drm] radeon: 512M of GTT memory ready.
[    5.105846] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.105850] [drm] Driver supports precise vblank timestamp query.
[    5.105876] [drm] radeon: irq initialized.
[    5.105883] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.107340] [drm] Loading RS780 Microcode
[    5.126475] Error: Driver 'pcspkr' is already registered, aborting...
[    5.168381] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[    5.168435] [drm:r600_startup] *ERROR* Failed to load firmware!
[    5.168482] radeon 0000:01:05.0: disabling GPU acceleration
[    5.169555] radeon 0000:01:05.0: f63b4600 unpin not necessary
[    5.169560] radeon 0000:01:05.0: f63b4600 unpin not necessary
[    5.169581] [drm] Enabling audio support
[    5.169814] [drm] Radeon Display Connectors
[    5.169818] [drm] Connector 0:
[    5.169820] [drm]   VGA
[    5.169824] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    5.169827] [drm]   Encoders:
[    5.169830] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.224704] [drm] radeon: power management initialized
[    5.302174] [drm] fb mappable at 0xF0040000
[    5.302177] [drm] vram apper at 0xF0000000
[    5.302180] [drm] size 5242880
[    5.302182] [drm] fb depth is 24
[    5.302184] [drm]    pitch is 5120
[    5.302269] fbcon: radeondrmfb (fb0) is primary device
[    5.331669] Console: switching to colour frame buffer device 160x64
[    5.350987] fb0: radeondrmfb frame buffer device
[    5.350990] drm: registered panic notifier
[    5.351000] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0
[    6.684540] Adding 976892k swap on /dev/sda2.  Priority:-1 extents:1 across:976892k
[    6.690234] EXT4-fs (sda1): re-mounted. Opts: (null)
[    6.831290] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.940292] loop: module loaded
[    8.207597] tg3 0000:02:00.0: irq 42 for MSI/MSI-X
[    8.996549] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.049473] RPC: Registered udp transport module.
[    9.049478] RPC: Registered tcp transport module.
[    9.049481] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.090923] FS-Cache: Loaded
[    9.135949] FS-Cache: Netfs 'nfs' registered for caching
[    9.159851] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.379540] sshd (1324): /proc/1324/oom_adj is deprecated, please use /proc/1324/oom_score_adj instead.
[   11.568154] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
[   11.568161] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
[   11.568435] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.584078] eth0: no IPv6 routers present

Das nächtliche Backup des NAS (HP Data Vault x312) auf USB-Platte ist eh’ nicht so wirklich überzeugend, hinzu kommt dass das Sharkoon USB-/eSATA-Gehäuse oft schier glüht, obwohl die verbaute Hitachi-Platte das Spindown-Kommando von hdparm ohne Fehler schluckt.

Also wieder ein Media Vault der 2100er Serie, und sichern per rsync. Nur diesmal bekommt die Schuhschachtel zwei 2TB Hitachi-Platten und ein Software-RAID1 – dazu bin ich bei der letzten nicht mehr gekommen, da keine 2 gleichen, großen Platten im Haus waren.

Per telnet relay-test.mail-abuse.org 25 kann – vom zu prüfenden Mailserver selbst aus- ein Test initiiert werden, der Verlauf sieht dann in etwa so aus:

Trying 168.61.4.13...
Connected to cygnus.mail-abuse.org.
Escape character is '^]'.
Connecting to MY.OWN.IP.ADDR ...
««« 220 mail.XXXXXXX.de brought to you on 100% recycled electrons ESMTP
»»» HELO cygnus.mail-abuse.org
««« 250 mail.XXXXXXX.de brought to you on 100% recycled electrons
:Relay test: #Quote test
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «"nobody@mail-abuse.org"»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 1
»»» mail from: «nobody@mail-abuse.org»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 2
»»» mail from: «spamtest@maps1.pa.vix.com»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #test 3
»»» mail from: «spamtest@localhost»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 4
»»» mail from: «spamtest»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 5
»»» mail from: «»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 6
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 7
»»» mail from: «spamtest@[MY.OWN.IP.ADDR]»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 8
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «nobody%mail-abuse.org@mail.XXXXXXX.de»
««« 550 no mailbox or alias named nobody%mail-abuse.org (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 9
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «nobody%mail-abuse.org@[MY.OWN.IP.ADDR]»
««« 550 no mailbox or alias named nobody%mail-abuse.org (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 10
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «"nobody@mail-abuse.org"»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 11
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «"nobody%mail-abuse.org"»
««« 550 no mailbox or alias named nobody%mail-abuse.org (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 12
»»» mail from: «spamtest@[MY.OWN.IP.ADDR]»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org@mail.XXXXXXX.de"»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 13
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «"nobody@mail-abuse.org"@[MY.OWN.IP.ADDR]»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 14
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org@[MY.OWN.IP.ADDR]»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 15
»»» mail from: «spamtest@[MY.OWN.IP.ADDR]»
««« 250 ok
»»» rcpt to: «@mail.XXXXXXX.de:nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 16
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «@[MY.OWN.IP.ADDR]:nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #Test 17
»»» mail from: «spamtest@[MY.OWN.IP.ADDR]»
««« 250 ok
»»» rcpt to: «mail-abuse.org!nobody»
««« 550 no mailbox or alias named mail-abuse.org!nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #test 18
»»» mail from: «spamtest@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «mail-abuse.org!nobody@[MY.OWN.IP.ADDR]»
««« 550 no mailbox or alias named mail-abuse.org!nobody (#5.5.0)
»»» rset
««« 250 flushed
:Relay test: #test 19
»»» mail from: «postmaster@mail.XXXXXXX.de»
««« 250 ok
»»» rcpt to: «nobody@mail-abuse.org»
««« 550 no mailbox or alias named nobody (#5.5.0)
»»» rset
««« 250 flushed
»»» QUIT
««« 221 mail.XXXXXXX.de brought to you on 100% recycled electrons
Tested host banner: 220 mail.XXXXXXX.de brought to you on 100% recycled electrons ESMTP
System appeared to reject relay attempts

Schaut schonmal garnicht so schlecht aus.

Ich habe mich jetzt 3 Tage gewundert, warum MRTG meine M0n0wall-CPU- und Uptime-Graphen nicht erstellt, bzw. warum die Graphen keine Daten darstellen… Die Lösung: Option[blah]: gauge [...]

In der Anleitung steht auch schön:

gauge

Treat the values gathered from target as ‘current status’ measurements and not as ever incrementing counters. This would be useful to monitor things like disk space, processor load, temperature, and the like …

In the absence of ‘gauge’ or ‘absolute’ options, MRTG treats variables as a counters and calculates the difference between the current and the previous value and divides that by the elapsed time between the last two readings to get the value to be plotted.

Der Hintergrund:

Ohne gauge denkt MRTG, dass die eingehenden Werte bei jedem Lauf höher sind als beim letzten, und versucht das Delta auszurechnen:

08:00 Uhr: 8MB,
08:01 Uhr: 9MB,
also 1MB/min

Mit gauge werden die Werte einfach angezeigt, also 8MB, 9MB, so funktioniert es auch wenn die CPU-Last z.B. wie folgt gemesen wurde:

08:00 Uhr: 84%,
08:01 Uhr: 36%